Bilstein - 25-261400 - F150 B8 5160 4WD Rear 46mm Monotube Shock Absorber (15-19)
- 2015 - 2017 Ford F-150 V6 3.5L (NA)
- 2018+ Ford F-150 V6 3.3L (NA)
- 2015 - 2019 Ford F-150 V8 5.0L
- 2015 - 2019 Ford F-150 V6 2.7L (EcoBoost)
- 2015 - 2019 Ford F-150 V6 3.5L (EcoBoost)
Note - For 4WD Only - For stock rear height - 2 inch lift
Bilstein B8 5160 remote reservoir shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. The remote reservoir will offer increased cooling capacity and wheel travel to optimize overall performance compared to a traditional shock absorber. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. Each shock absorber is fitted with a unique 360 degree swivel banjo hose fitting, providing a clean, low profile installation. B8 5160 remote reservoir shock absorbers will increase overall durability of your vehicle allowing you to conquer the harshest of off-road environments.
- An extremely affordable and practical alternative to coil spring spacers, with the benefit of BILSTEIN's superior monotube design
- Lifetime Warranty
- Utilizes the vehicle's stock front coil springs
- Zinc finish with multi-layer unique BILSTEIN coating for extreme protection
- Self-adjusting deflective disc valving with independent rebound and compression tuning
Collapsed Length: 16.85"
Extended Length: 28.62"
Finish: Zinc Plated
Body Design: Smooth Body (Non-Coilover)
Body Diameter: 46mm
When August Bilstein laid the foundations for the innovation incubator BILSTEIN in Altenvoerde in Germany's Westphalia region in 1873, nobody had any idea of the crucial influence the company's products would one day have on the driving comfort and safety of cars. Instead it was metal window fittings - sold under the catchy name of AUBI, an abbreviation of August Bilstein - that soon made the company famous far beyond the boundaries of Bilstein's local region and even abroad.
A whole series of technical innovations followed and the revenues earned through these patents provided a solid basis for the later successes of what was still a young company. In order to meet the exacting quality demands already in the preliminary stage of manufacturing the fittings, the company set up its own strip iron rolling mill in 1919. In line with the motto "A rolling stone gathers no moss", Hans Bilstein, who had taken over the running of the company from his father, returned to his native Westphalia from the USA, which in the 1920s was still a long way away, bringing with him new concepts for nickel- and chrome-plating processes.
Entry into the automotive business: 1928-1954
It was in 1927 that Hans Bilstein made the first move towards the automotive accessories industry, through his co-operation with the Berlin-based lifting gear company Levator-Hebezeug-Fabrik. He did not have to wait long to see his activities bear fruit.
In 1928, four years before the opening of the first motorway between Cologne and Bonn, BILSTEIN supplied the first chrome-plated bumper for mass-produced cars. Just one year later the company began producing car jacks. In typical BILSTEIN style, it entered this market with a resounding technical innovation, introducing the first usable side jack to a world that was only slowly getting used to the car. But the true world sensation was still to come.
Gaining the lead through expertise and technology: 1954 to the present day
In 1954, BILSTEIN was the first to realise the potential offered by an idea of Prof. Bourcier de Carbon, a French researcher in the field of vibrations. The aim was to eliminate the physical disadvantages of the conventional telescopic shock absorbers, whilst at the same time making the dampers lighter and able to be fitted in any position.
Enormous effort went into development, accompanied by substantial investment in the necessary production facilities, in order to achieve this ambitious target. And it paid off. The introduction of the first mono-tube gas pressure shock absorber in a standard production Mercedes-Benz vehicle in 1957 by what was at the time the 'Fittings and car jack manufacturer BILSTEIN' (Beschlag- und Wagenheber-Hersteller BILSTEIN) is still today considered a major contribution to active driving safety.
Gas pressure technology is now used in all types of telescope shock absorbers developed for use on powerful, high-class cars. The latest highlight is the development of the air spring module that BILSTEIN supplies 'just in sequence' to the Mercedes S-Class production line.
To this day, the demands of its customers in the automotive and tuning industries, combined with its commitment to motor sports, are what drive development and innovation at BILSTEIN. All AMG Mercedes in the DTM and over half of the teams in the 24 hour race on the Nürburgring approach the starting line with BILSTEIN accessories.
The name BILSTEIN has for many decades been closely associated with high tech in the field of suspension design, driving comfort and safety. In order to expand this position in the future, BILSTEIN became a division of ThyssenKrupp Technologies AG in 1988, and a wholly-owned subsidiary in 2005. The partnership and co-operation within the group will enable the company to continue to inspire with innovations in the traditional BILSTEIN way.